Spypoint FORCE-11 - Error Messages

17
Error message Possible solutions
Insert memory
card
The use of a memory card is required to record photos
and videos.
Card error
The camera cannot access the memory card.
• Turn off the camera and turn it on again
• Remove the memory card and insert it again.
• Verify if the gold contacts are clean.
• Format the memory card.
Low battery
Appears on the screen just before the camera turns
off. Recharge the batteries or insert new ones. Always
verify the battery level before using the camera.
No image
Therearenolestoview.Verifyifthememorycard
contains photos/videos.
Protectedle
Itisimpossibletodeletethelebecauseitisprotected.
To delete this le andall the others, just formatthe
memory card.
Error messages
FORCE