8
MEMORY CARD
A memory card is required to record photos and videos. The camera is
compatible with SD/SDHC memory cards, up to 32 GB capacity (sold
separately, p.18).
When the camera is turned on and no memory card is used, the camera
beeps. In TEST mode, the screen displays "Insert Memory Card".
The percentage of used space on SD card appears in the top right corner
of the screen in TEST mode, and the number of photos left appears in the
bottom left corner.
Here is a table of the approximate number of photos and length of videos
that can be recorded with different memory card capacities. Many photo and
video resolutions are noted, see those corresponding to the camera.
Note: This SPYPOINT camera is equiped with continuous le recording.
When the memory card is full, the camera will continue to record photos or
videosbydeletingtherstrecordedles.
4 GB 8 GB 16 GB 32GB
Photo
3 MP 4100 8200 16400 32800
4 MP 3800 7600 15200 30400
5 MP 3400 6800 13600 27300
6 MP 3200 6300 12600 25300
7 MP 2700 5500 10900 21800
8 MP 2400 4800 9500 19000
9 MP 2200 4500 8900 18000
10 MP 1900 3800 7600 15200
11 MP 1700 3400 6700 13400
12 MP 1600 3200 6300 12600
Video
320 x 240 4 h 8 h 16 h 32 h
640 x 480 2h10 4h10 8h20 16h40
1280 x 720 40 min 1h20 2h40 5h20
Memory card / "BUSY" LED / Mounting bracket
FORCE
INSERTING THE MEMORY CARD
Insert an SD/SDHC memory card (up to 32 GB capacity) in the card slot.
The card is inserted correctly when a click is heard.
Before inserting or removing a memory card, always turn off the camera
to prevent loss or damage of the photos already recorded.
REMOVING THE MEMORY CARD
Lightly press the memory card into the camera once to pop it out of the slot
and remove it.
BUSY LED
The BUSY light is located at the back of the camera and is covered by a rubber
cap. In order to see the BUSY light, the rubber cap has to be removed.
It is a diagnostic tool. It lights up when the camera starts, when the camera
recordsaleandinTESTmodeatthesametimeasthetestlight(located
in front of the camera).
To Next Page
Loading...
