21
FORCE-PROSPYPOINT
MESSAGES DISPLAYED ON THE SCREEN DESCRIPTIONS / SOLUTIONS
NO CARD
A memory card is required to save videos and photos. Make sure the camera is turned OFF,
then insert the SD memory card and turn the camera back ON.
CARD ERROR
The camera cannot access the memory card:
1. Turn OFF the camera and turn it back ON again.
2. Remove the memory card and reinsert it.
3. Check if the gold contacts are clean.
4. Make sure the switch on the side of the card is not in LOCK position.
5. Format the memory card (so that you don’t delete your files,
copy them externally before formatting the card).
6. Replace your SD card.
BATTERY LOW
Appears on the screen just before the camera turns OFF :
1. Replace the batteries with new ones.
2. Plug the device into a 12 V power source.
FORMATTING IN PROGRESS
Wait until the formatting process is completed.
FORMATTING COMPLETED
No further action is required.
troubleshooting
To Next Page
Loading...
