8
MEMORY/SD CARD
A memory card is required to record photos and videos. The camera is
compatible with SD/SDHC memory cards, up to 32 GB capacity (sold
separately). The use of a MICRO SD card IS NOT recommended.
The screen displays "Insert Memory Card" when the camera is turned on
and no memory card is used.
Here is a table of the approximate number of pictures and video length that
can be recorded on different memory card capacities. Refer to those corres-
ponding to the camera model accordingly.
Note: This SPYPOINT camera is equipped with continuous le recording.
When the memory card capacity is full, the camera will continue to record
photos or videos by deleting the rst recorded les.
4 GB 8 GB 16 GB 32GB
Photo
12 MP 1600 3200 6300 12600
Video
1280 x 720 40 min 1h20 2h40 5h20
Memory/SD card & ''Busy'' light
INSERTING THE MEMORY CARD
Before inserting or removing a memory card, always turn off the camera to
prevent loss or damage. Also make sure the switch on the side of the card
SD card is set on unlock.
Insert a standard full-size SD/SDHC memory card (up to 32 GB capacity) in
the SD card inserts, label side facing upward. The card is inserted correctly
when a click is heard.
We strongly suggest to slow format the SD card on a computer before
use, even more if it has been used in another device. This will maximize
the memory card capacity and compatibility.
REMOVING THE MEMORY/SD CARD
Lightly push the memory card into the camera once to pop it out and re-
move it.
BUSY LED
The BUSY light is located at the back of the camera , on the battery door itself.
It is a diagnostic tool. It lights up when the camera starts, when the camera
records a le and in TEST mode in same time as the test light (located in
front of the camera). Once the camera gets to the end of the connection
process, the BUSY light will light ON, solid, as the camera is recording a pic-
ture/video then go OFF and will light ON again as sending the information
in your account.
To Next Page
Loading...
