SRAM G2 RE User Manual

30
Piston Assembly Installation
P iston Assembly Installation
NOTICE
DOT brake fluid will damage painted surfaces. If any fluid comes in contact with a painted surface (i.e. your frame) or printing on the brakes, wipe
it off immediately and clean it with isopropyl alcohol or water. Damage to painted and/or printed surfaces by DOT brake fluid is not covered under
warranty.
Submerge the new piston assembly in SRAM High-Performance Submerge the new piston assembly in SRAM High-Performance
DOT 5.1 brake fluid to lubricate the seals.DOT 5.1 brake fluid to lubricate the seals.
Install the new lubricated piston assembly, spring first, into the lever Install the new lubricated piston assembly, spring first, into the lever
body.body.
lnstall the washer onto the piston assembly. Use a pick to center the lnstall the washer onto the piston assembly. Use a pick to center the
washer.washer.
1
SRAM High-Performance DOT 5.1 brake fluid
2
3
Pick

SRAM G2 RE Specifications

General

Brand	SRAM
Model	G2 RE
Category	Bicycle Accessories
Language	English