SRAM G2 RE

11
Caliper Piston Removal
Caliper Piston Removal
NOTICE
DOT brake fluid will damage painted surfaces. If any fluid comes in contact with a painted surface (i.e. your frame) or printing on the brakes, wipe
it off immediately and clean it with isopropyl alcohol or water. Damage to painted and/or printed surfaces by DOT brake fluid is not covered under
warranty.
Remove the hose boot from the compression nut and slide it away from Remove the hose boot from the compression nut and slide it away from
the caliper. the caliper.
Remove the compression nut and hose.Remove the compression nut and hose.
1
8 mm flare nut wrench