Software description
Settings window (Server Mode tab)
7 PTT Manager Port tab
Dropdown list for selecting a COM Port for PTT control (change to the transmit
mode) of the transceiver and for connection of a Morse key. For PTT the RTS signal,
and for the Morse key the DTR signal of the chosen COM Port are used.
Note: It may be used the same COM Port as for the CAT Interface.
8 Start CAT button
On/off switch for the CAT Interface (with the chosen parameters).
SSB-Electronic GmbH © Page 40 of 88 V2.8.1 Content is protected by Copyright.
To Next Page