Software settings
Setting of audio devices
For example, such is the control
panel of the ASIO4ALL driver (see
picture). Here, the selection of audio
input/output devices and the Buffer
Duration setting is made (not in
seconds but in samples of the
signal).
As an example for the selection of
audio input/output devices, we will
consider the use of the Breakaway
Live Audio Processor software. This
program processes sound in real
time and significantly improves the
sound of the station.
For use of this sound processor
(like any other), you must select the
virtual audio cable as input in
ZeusRadio, and also the same virtual
audio cable as output device in the
sound processor settings, while the
microphone is the input device.
SSB-Electronic GmbH © Page 71 of 88 V2.8.1 Content is protected by Copyright.
To Next Page
Loading...