External iPod operation
An external iPod can use the car AV system as a monitor and amplifier.
1. Use the iPod cable to make the car AV system and the external iPod connected
through the AUX IN jack on control panel of the car
AV system and the headphone
port of the external iPod.
2. Play the external iPod, then use SRC button to enter AUX IN mode for the car AV
system. By now, the program played by the external iPod can be output through the
monitor
of the car AV system and the speakers connected to the car AV system.
* The icons on the AUX interface descript as follows:
: Popping up Source Menu.
: Same as VOL+ button or rotating
VOL knob with clock wise.
: Same as VOL- button or rotating
VOL knob with anti-clock wise.
3. In AUX IN mode, you can use SEL, +, -, VOL, MUTE, EQ , SW and LOUD buttons
or icons to adjust
audio and video.
pn
oHeadhoeprt
-32-
MUTE : Same as MUTE button.
EQ : Same as EQ button.
: To pop up BLUETOOTH PHONE
interface.
AF : To switch AF mode on or off.
TA : To switch TA mode on or off.
AUX1 IN
USER SWF
MIC
To Next Page
Loading...
