SSZN SR6070 - User Manual

SR Series 3D Camera
——Quick Start Guide

Summary

Preparation before Installation

Camera Description

2.1 Description of Camera SR6000

Detailed description and component identification for the SR6000 camera model.

2.2 Description of Camera SR7000

Detailed description and component identification for the SR7000 camera model.

2.3 Description of Camera SR8000

Detailed description and component identification for the SR8000 camera model.

Controller Description

Precautions for Mounting the Camera

Precautions for cable use

Hardware Connection

6.1 System Connecting Diagram

Overview of the system's hardware connection diagram.

6.1.1 Connection method for continuous trigger mode

Wiring diagram for establishing a continuous trigger mode connection.

6.1.2 Connection method for external trigger mode

Wiring diagram for establishing an external trigger mode connection.

6.1.3 Connection method for encoder trigger mode

Wiring diagram for establishing an encoder trigger mode connection.

6.1.4 Cautions for wiring

Important safety and operational notes for wiring connections.

6.2 Connecting the controller and the Camera

Procedure for connecting the camera to the controller unit.

6.3 Connecting the Power Supply to the Controller

Procedure for connecting the power supply to the controller.

6.4 How to Use the Terminal Block

Instructions on how to correctly use the terminal block for connections.

Software Connection

7.1 Install EdgeImaging software

Detailed guide on installing the EdgeImaging software on a PC.

7.2 Connecting the controller and the PC

Procedure for establishing a network connection between the controller and the PC.

Product Selection

Dimensions

SSZN SR6070 Specifications

General

Brand	SSZN
Model	SR6070
Category	3D camera
Language	English