ST FP-SNS-DATALOG2 User Manual

The above procedure is available only for STWIN.box. Sensortile.box PRO default firmware doesn't enable BLE
pairing via NFC.
In alternative, STWIN.box and Sensortile.box PRO can be connected to the ST BLESensor app by just open
manually the application.
The board presents itself as BLEDfFw. During BLE pairing, if requested, you must insert the following PIN:
123456.
The application shows the environmental data coming from the board (temperature and pressure).
At this point, you can choose to upgrade the firmware on the board directly by using the mobile app, by selecting
one of the available firmware.
Firmware Update – FFOTA for STWIN.box and
Sensortile.box PRO
22

ST FP-SNS-DATALOG2 Specifications

General

Brand	ST
Model	FP-SNS-DATALOG2
Category	Data Loggers
Language	English