ST STM32 Nucleo-64-P User Manual

Connectors UM2206
34/55 UM2206 Rev 3
10.2 Arduino Uno V3 connectors
The Arduino connectors CN7, CN8 CN9 and CN10 (see Figure 15) are female connectors
compatible with Arduino standard. Most shields designed for Arduino can fit to the STM32
Nucleo-64-P board.
The Arduino connectors on STM32 Nucleo-64-P board support the Arduino Uno V3.
Figure 15. Arduino connectors
The related pinout for Arduino connector is showed in Figure 16 and listed in Table 14.
Arduino_D[8..15]: CN7
Arduino_D[0..7]: CN9
Arduino_A[0..5]: CN10
Arduino_PWR: CN8
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

ST STM32 Nucleo-64-P Specifications

General

Ethernet	No
Microcontroller	STM32
Core	ARM Cortex-M
Operating Voltage	3.3V
Input Voltage	7-12V
Communication Interfaces	SPI, I2C
SRAM	Varies by STM32 variant
Clock Speed	Varies by STM32 variant
USB	Yes
Arduino Compatibility	Yes
ST Morpho Headers	Yes
On-board Debugger	ST-LINK/V2-1
USB Connector	Micro-USB
Extension Headers	Arduino Uno Revision 3 connectivity, ST morpho extension pin headers for full access to all STM32 I/Os