ST STM32F746G-DISCO - Product Features and Information; Features Overview; Demonstration Software

Features UM1907
6/49 DocID027942 Rev 3
1 Features
• STM32F746NGH6 microcontroller featuring 1 Mbyte of Flash memory and
340 Kbytes of RAM, in BGA216 package
• On-board ST-LINK/V2-1 supporting USB reenumeration capability
•
ARM
®
mbed
™
-enabled (see http://mbed.org)
• USB functions: virtual COM port, mass storage, debug port
• 4.3-inch 480x272 color LCD-TFT with capacitive touch screen
• Camera connector
• SAI audio codec
• Audio line in and line out jack
• Stereo speaker outputs
• Two ST MEMS microphones
• SPDIF RCA input connector
• Two push buttons (user and reset)
• 128-Mbit Quad-SPI Flash memory
• 128-Mbit SDRAM (64-Mbit accessible)
• Connector for microSD card
• RF-EEPROM daughterboard connector
• USB OTG HS with Micro-AB connectors
• USB OTG FS with Micro-AB connectors
• Ethernet connector compliant with IEEE-802.3-2002
• Five power supply options:
–ST LINK/V2-1
– USB FS connector
– USB HS connector
– VIN from Arduino connector
– External 5 V from connector
• Power supply output for external applications: 3.3 V or 5 V
• Arduino Uno V3 connectors
• Comprehensive free software including a variety of examples, part of STM32Cube
package
• Supported by a wide choice of integrated development environments
2 Demonstration software
The demonstration software is preloaded in the STM32F746NGH6 Flash memory. The
latest versions of the demonstration source code and associated documentation can be
downloaded from www.st.com/stm32f7-discovery.