1 Features
• STM32W5MMG (1-Mbyte Flash memory, 256-Kbyte SRAM, in Module RF package)
– Dual-core 32‑bit (Arm
®
Cortex
®
-M4 and dedicated M0+ CPU for real-time radio layer)
– 2.4 GHz RF transceiver supporting Bluetooth
®
specification V5.2, 802.15.4 with Zigbee
®
, Thread
®
, and
proprietary protocols
• 0.96-inch 128×64 OLED display
• 128-Mbit Quad-SPI NOR Flash Memory
• Temperature sensor
• Accelerometer/gyroscope sensor
• Time‑of‑Flight and gesture‑detection sensor
• Digital microphone
• RGB LED
• Infrared LED
• 3 push‑buttons (2 users and 1 reset) and 1 touch key button
• Board connectors:
– STMod+
–
ARDUINO
®
Uno V3 expansion connector
– USB user with Micro-B connector
– TAG10 10-pin footprint
• Flexible power-supply options: ST-LINK/V2-1 USB connector, 5 V delivered by ARDUINO
®
or external
connector, USB charger, or USB power
• On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: Virtual COM port and
debug port
• Comprehensive free software libraries and examples available with the STM32CubeWB MCU Package
• Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded
Workbench
®
, MDK-ARM, and STM32CubeIDE
Note: Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
UM2825
Features
UM2825 - Rev 1
page 2/42
To Next Page
Loading...
Need help?
General
