5 Safety recommendations
5.1 Targeted audience
This product target users with at least basic electronics or embedded software development knowledge like
engineer, technician, or student.
This board is not a toy and is not suited for use by children.
5.2 Handling the board
This product contains a bare printed circuit board and as with all product of this type, the user must be careful
about the following points:
• The connection pins on the board may be sharp, be careful when handling the board to avoid hurting
yourself.
• This board content static sensitive devices. To avoid damaging it, handle the board in an ESD‑proof
environment.
• While powered, do not touch the electric connections on the board with fingers or anything conductive. The
board operates at a voltage level that is not dangerous, but components may be damaged when shorted.
• Do not put any liquid on the board and avoid operating the board close to water or at a high humidity level.
• Do not operate the board if dirty or dusty.
UM2825
Safety recommendations
UM2825 - Rev 1
page 6/42
To Next Page
Loading...
