Stanley Easikey 250 - Page 39

3. On the sending Easikey 250, press the Middle button for two seconds:
CopyingDatabase
 Ready

Easikey250
 Found

Note: If the cable connection is not correct, only the CopyingDatabase
message is displayed.
2. On the sending Easikey 250, press the Left button:
Copyingdatabase
 38%

Copyingdatabase
 38%

▼
Copy
c
omplete

 100%

Note: Each packet of data is verified during the transfer process to ensure
completeness. The copy will take about 45 seconds to complete.
If the process has not started within 15 seconds, a DatabaseCopy
Failed message is displayed. You should check the cable wiring.
39