24
It is possible to query the exhaust temperature, ambient temperature and the status of the inputs. Whether the input status is
open (0) or closed (1).
10.4.4. Cleaning Reset
In the Service menu with P4 and P6 select the Cleaning Reset function by pressing on the P3 key.
In this function you can switch this function on or off. To return to the Service menu, press P1.
10.4.5. Auger Calibration
In the Service menu with P4 and P6 select the Auger Calibration submenu, pressing the P3 key to validate.
To Next Page
Loading...
