46
a) b)
Figure 45 - a) Remove the screws; b) Remove the extractor
15.4. Cleaning the glass
The glass may only be cleaned with the unit completely cold, and using an appropriate product, as per the instructions for use.
You should prevent the product from reaching the sealing ring and painted metal parts so that no undesirable oxidation occurs.
The sealing ring is glued, so should not be exposed to moisture from water or cleaning products.
Figure 46 - Incorrect cleaning of the glass
a) b)
Figure 47 - Cleaning of the glass: a) moisten a soft cloth with liquid; b) clean the glass with the cloth
WARNING! The maintenance task frequency depends on the quality of the pellets.
Note: See the warning label and read the maintenance instructions in chapter 18.
16. Maintenance Plan and Log
To ensure the proper operation of the unit, maintenance operations must be performed, as described in Chapter 16 of this
Instruction Manual. There are specific maintenance tasks that must be performed by authorised technicians only. Please contact
the person responsible for installing the unit. To make sure the warranty remains valid, the maintenance operations performed on
this unit must comply with the frequency requirement specified in the manual, and the service technician must fill and sign the
maintenance log.
To Next Page
Loading...
