Stanley K1200 - 19. Installation Diagrams

55
19. Installation Diagrams
Simple connection only the central heating radiators
Figure 49 - Simple connection only the central heating radiators
The installation of an anti-condensation valve is recommended for K1200.
Note:
- The chrono-thermostat should have 1 to 2 °C of hysterisis.
- Hydro independent “On” (water temperature-controlled regulation)
- Modulating pump “On”
- Water sensing inhibition “On”
- Alternative hydro shutdown “On”
- Pump “On” = 50 °C
- Pump “Off” = 50 °C
We can set / change according to the customer's discretion to another temperature.
Connection to central heating radiators and sanitary water combined with solar panel
Figure 50 - Connection to central heating radiators and sanitary water combined with solar panel
The installation of an anti-condensation valve is recommended for K1200.
1
1
1
1