26
In this submenu you can set the combustion power only in automatic mode. If you set it, all the menus for changing the power
will not be visible. With P4 and P6 you must select On or OFF and validate the choice with the P3 key.
10.4.8. Manual Load
Select Manual Load, with the P3 key, to validate the entry in this submenu.
This function activates the pellet manual loading.
Pressing the P1 key twice will take you back to the main menus, Settings, Display, Service and System Menu.
S
YSTEM
M
ENU IS AN EXCLUSIVE ACCESS MENU FOR THE TECHNICAL SERVICE AND REQUIRES A PASSWORD
.
10.5. Power Menu
Press the P3 key to access the following menus, Power, Thermostats and Chrono. Use the P4 and P6 keys to select the required
menu and then press P3 to confirm the choice, in this case the Power menu.
To Next Page
Loading...
