29
For the Daily programme, you must use the P4 and P6 keys to select the day of the week, in this case the programme for Monday,
and then press P3 to validate your choice.
You must press P3 and this option will be in editable mode, flashing. Press P4 and P6 to select the desired time and then use the
P3 key to save. Repeat this process for the time at which the unit is to shut down, using P4 and P6. Finally, activate the interval
by pressing P5, and a check mark will appear to the right of the interval.
In the image above the system will turn on at 20:30 on Monday and will turn off at 06:30 on Tuesday. When programs are
developed around midnight with the intention of starting operation the day before and finishing operation the next day it will be
relevant:
- Set the OFF time of the day before at 23:59;
- Set the ON time for the next day at 00:00.
For the Weekly programme, the programmes are the same for every day of the week, from Monday to Sunday. Use the P4 and P6
buttons to select weekly from the Programme submenu and press P3 to confirm the choice.
To Next Page
Loading...
