Star Micronics BSC10 Series - Connecting the Interface Cable to the Printer

- 5 -
3-2. Connecting the Interface Cable to the Printer
Printer cables are not included in the package.
Obtainanappropriatecablethatcomplieswiththespecicationsbeforehand.
Because the appropriate interface cable differs depending on the system that you are connecting the printer to, contact the dealer
that you bought the product from if you are unsure about what cable to use.
Before connecting or disconnecting an interface cable, be sure to disconnect the AC adapter’s power cord from the outlet.
3-2-1. USB Cable
To connect a USB cable, follow the procedure given below.
1) Make sure that the AC adapter’s power cord is not connected to the outlet.
2) Connect the USB cable to the USB port.
3) Asshowninthegure,passthecablethroughthecablehookstoholditinplace.
Cable hook
USB cable