Star Micronics NX-1500 - Chapter 4 Parts Replacement; Precautions for Disassembly and Reassembly

CHAPTER 4
PARTS REPLACEMENT
This chapter explains disassembly and reassembly of the printer.
Note the following precautions during disassembly and reassembly.
1. Disconnect the printer from the wall outlet before servicing it.
2. Assembly is the reverse of disassembly unless otherwise specified.
3. After reassembly, coat the screw heads with locking sealant.
4. Lubrication information is not provided in this chapter. Refer to item 2 in chapter 5.
1. Upper Case Unit .................................................................................................. 37
2. Control Panel Board ........................................................................................... 37
3. Printer Mechanism .............................................................................................. 38
4. Main Logic Board ................................................................................................ 38
5. Fuse Board Unit .................................................................................................. 39
6. Fuses .................................................................................................................... 39
7. Print Head ............................................................................................................ 40
8. Paper Feed Motor Unit ........................................................................................ 40
9. Carriage Motor Unit............................................................................................. 41
10. Bail Roller Shaft Unit .......................................................................................... 41
11. Platen Unit ........................................................................................................... 42
12. Tractor Unit .......................................................................................................... 42
1
2
3
4
5
6
7