Star Micronics SM-S230I Series - Bluetooth Connectivity; Pairing

2.2 Bluetooth
2.2.1 Pairing
1. Press and hold POWER button for approx. 5 seconds, and printer is turned on.
Then, it is ready to pair with another Bluetooth device.
CAUTION
1) For security purposes, we recommend that you change the PIN.
The following utility is required to change the PIN.
Please download and use the utility soft from the following URL.
iOS https://www.star-m.jp/prjump/000003.html
Android https://www.star-m.jp/prjump/000004.html
Windows https://www.star-m.jp/starprnt-portable-wsw.html
Or, please contact the seller.
For instructions on how to use this utility, please refer to the Bluetooth Setting Utility Software Manual.
2) If the quantity of data which is printed at once is more than 1M byte on Bluetooth communication,
it would cause the buer to overow and the data to get damaged.
3) For instructions on how to connect with a host device, please refer to your host device user
manual.
You can test the connectivity with a host device by using StarIO SDK Application which is
available on Apple Store and Google play.
Select "Star Micronics".
3. If necessary, enter the following information into the terminal that you are using.
PIN: 1234 (default)
Device name: Star Micronics (default)
2. On the host device, tap [Settings]. Set [Bluetooth] to ON.
<
iOS
>
<
Android
>
- 15 -