Star Micronics SM-S230I Series - 5 General Specifications

5. General Specications
Item Specications
Printing Method Direct line thermal printing
Characters Per Line Maximum 42 cpl
Character Size
Alphanumeric characters: 9
×
24 dots, 12
×
24 dots, 9
×
17 dots
Japanese characters: 24
×
24 dots
Character Types
Alphanumeric characters, expanded graphic characters, JIS Level-1 Kanji Set,
JIS Level-2 Kanji Set, and special characters
Dot Density 203 dpi, 8 dots/mm
Printing Width 48 mm
(
384 dots)
Printing Speed 80 mm/sec (default), 50 mm/sec
Interface
Bluetooth
Bluetooth Spec. Bluetooth Ver. 3.0/Class 2 (10 m)
Frequency Range 2.4 GHz ISM BAND
Support Prole SPP(Serial Port Prole)
USB 2.0
Roll Paper Thermal roll paper ( 58.0 mm wide with a diameter ø40 )
Barcode
1D : EAN8, EAN13, UPC-A, UPC-E, ITF, Code39, Code93, Code128, CODABAR(NW-7)
2D : PDF417, QR Code, DATA Matrix
Receive Buer Size 1MB
*1)
Emulation ESC/POS (default), StarPRNT
MSR
(Model with Card Reader)
Reads ISO 7810/7811/7812 1& 2 & 3 track or JISII track.
Sensor Supports black mark sensors.
Battery Pack Rechargeable 7.4V DC 1150 mAh
Battery Operating Time
Approximately 15 hour printing (12 receipts per hour)
Approximately 18 hour printing
(12 receipts per hour / Sleep setting after 1 minute)
Battery Charger
Input: 100 to 250 V AC, 50 to 60 Hz
Output:8.4 VDC/0.8 A, Time required for full charge: 4 hours
Environmental Requirements
During charging Temperature : 0
o
C to +45
o
C
During operation
*2)
Temperature : 0
o
C to +45
o
C
Humidity : 30% to 80% (No condensation)
During storage
Temperature : -20
o
C to +50
o
C (1month)
-20
o
C to +40
o
C (3month)
-20
o
C to +20
o
C (1year)
Humidity : 10% to 90% (No condensation)
Print Head Life Approximately 50 km
Drop Resistance 1.5 m *Our test procedure, not guarantee.
*1) If the quantity of data which is printed at once is more than 1M byte on Bluetooth communication, it would cause the buer
to overow and the data to get damaged.
*2) Under 10°C, please change Printing speed into" 50mm/s" and Density mode into “High”.
- 33 -