Star Micronics SM-S230I Series - Paper; Paper Specifications; Recommended Paper

4. Paper
4.1 Paper Specications
Type: Thermal Paper
Paper width: 57.5±0.5 mm
Paper thickness: 58 to 75±5μm
Outer diameter: Ø40 mm or less
Core shaft inner diameter:Ø12mm or more
Core shaft outer diameter: Ø18mm or more
Recording side: Outside of roll
4.2 Recommended Paper
Manufacturer Product Name
Paper thickness
Mitsubishi Paper Mills Limited P220AG 65μm
Oji Paper Co., Ltd. PD450 65μm
PD160R 75μm
PD160R-63 63μm
Appvion Alpha 400-2.3 58μm
4.3 Printing Range
CAUTION
1) Do not use roll paper whose end is glued to its core, because the printer will be unable to
properly detect the end of the paper. Also, we recommend that you use roll paper that has a
roll end mark at its end.
2) Chemicals and oil may cause the roll paper to change color or cause the printed characters
to become lighter.
3) The roll paper starts changing color at approximately 70°C.
Please be aware that the roll paper can be aected by heat, humidity, and direct sunlight.
4) The roll paper may change color if you scratch it with your ngernail, a hard piece of metal,
etc.
48 mm (Printing Area)
57.5
±
0.5 mm (Paper Width)
4.75 mm
4.75 mm
- 32 -