Star Micronics SM-S230I Series - Printer Features

3. Printer Features
3.1 Control Panel
3.1.1 Button
①POWER Button :
Pressing and holding the POWER button for 5 seconds or more will turn the power on or o.
② FEED Button :
When the printer is on, pressing and holding the FEED button for 1 second or more feeds a paper.
Pressing the ①POWER button and ②FEED button simultaneously enables you to change the
printer mode setting.
The buttons are also used to change the mode and change over the setting contents.
(For more details on the mode setting, refer to "3.3. Memory Switch Setting".)
3.1.2 Panel Lamp
③ POWER (Green) : Printer is ON and ready to receive data.
When the memory switch is set, it indicates the printer mode to be
set by ashing by a predetermined number of cycles.
④ERROR (Red) : Indicates an error has occurred.
When the memory switch is set, it indicates the current setting contents
by ashing by a predetermined number of cycles.
⑤ Bluetooth lamp (Blue): iOS  Always turns on during Bluetooth pairing.
Android / Windows  Only turns on when communication occurs
during Bluetooth pairing.
The lamp ashes while data receiving is in progress.
⑥ Battery lamp (Green): Indicates the battery charge level.
When the battery lamp dims, charge the battery.
 * If the printer is operated with a low battery charge level, the paper
feed operation is not performed correctly resulting in narrower line
spaces.
･･･ Indicates that the battery charge level is sucient.
･･･ Indicates that the battery charge level is decreasing.
Charge the battery.
･･･ Indicates that the battery charge level is extremely low.
Immediately stop using the printer and charge the battery.
② FEED Button
⑤ Bluetooth Lamp
① POWER Button
③ POWER Lamp
⑥ Battery Lamp
④ ERROR Lamp
- 20 -