– 117 –
APPENDIX
Appendix C: USB, Ethernet and Wireless LAN Interface
C-1. USB Interface Specifications
1. General Specification: Conforms to USB 2.0 Specifications
2. Communication Speed: USB Full Speed Mode (12 Mbps)
3. Communication Method: USB Bulk Transmission Mode
4. Power Specifications: USB Self-power Function
5. Connector: USB Up-Stream Port Connector (USB Type-B)
C-2. Ethernet Interface Specifications
1. General Specification: Conforms to IEEE802.3
2. Communication Media: 10 Base-T/100 Base-TX
3. Communication Speed: 10/100 Mbps
4. Protocol: TCP/IP
5. TCP/IP detail: ARP, RARP, BOOTP, DHCP, LPR, #9100, FTP,
HTTP, TELNET, TFTP
6. Connector: RJ-45 (8-pin modular)
Note: Factory-set login password for administrator
One of the following protocols may be used for changing the settings
on this product:
HTTP (web), TELNET, or FTP. To do so, it is necessary to log in using
an administrator account for the product.
Use the following administrator account information on HTTP (web),
TELNET, or FTP.
Administrator account name: “root” (required)
Password: “public” (required)
The password may be changed after logging in.
C-3. Wireless LAN Interface Specifications
1. General Specification: Conforms to IEEE802.1lb
2. Communication Media: 2.4 GH
Z
DSSS wireless CF card
3. Operating Channels: North America : 1-11 ch
Japan : 1-14 ch
Europe : 1-13 ch
To Next Page
Loading...
