Star Micronics SP500 Series - 4-4. Turning Power On; 4-5. Attaching the Rear Cover

– 11 –
ENGLISH
4-4. Turning Power On
Make sure that the power cord has been connected as described in 4-3.
(1)Set the power switch located on the right side of the printer to on.
The POWER lamp on the control panel will light up.
Important!
We recommend that you unplug the printer from the power outlet
whenever you do not plan to use it for long periods. Because of this, you
should locate the printer so that the power outlet it is plugged into is
nearby and easy to access.
4-5. Attaching the Rear Cover
Attach the rear cover if necessary.
H
V
OFF
ON
ERROR
ERROR
POWER
POWER
FEED
FEED
Power switch
OFF
ON
OFF
OFF
ON
ON