Star Trac 8-TRx - Page 47

Page 47
Error
Code
Name Description Diagnosis
Command
Used
27
ERR_FIT_PROG_PARAMETERS_RESP_
TIMEOUT
Timeout waiting for a program param-
eters response from the Fit CPU. This
is reported when the display times
out waiting for a program parameters
response from the FitCPU.
1) Re-boot the unit and see if the prob-
lem goes away .
2) If the problem persists, check the
comms cable between the FitCPU and
the Display .
3) If the problem still persists change
the comms cable.
DISP_ERROR
28
ERR_FIT_PROG_PROFILE_RESP_
TIMEOUT
Timeout waiting for a program prole
response from the Fit CPU. This is
reported when the display times out
waiting for a program prole response
from the FitCPU.
1) Re-boot the unit and see if the prob-
lem goes away .
2) If the problem persists, check the
comms cable between the FitCPU and
the Display .
3) If the problem still persists change
the comms cable.
DISP_ERROR
29 ERR_GUI_QUEUE_WRITE
Error writing to gui queue. This is
reported when the computer has an
internal error.
1) Re-boot the unit and see if the prob-
lem goes away .
2) If the problem persists, replace the
computer.
DISP_ERROR
30 ERR_CV_QUEUE_WRITE
Error writing to cv queue. This is
reported when the computer has an
internal error.
1) Re-boot the unit and see if the prob-
lem goes away .
2) If the problem persists, replace the
computer.
DISP_ERROR
31 ERR_FIT_FIFO_WRITE
Error writing to Fit FIFO. This is report-
ed when the computer has an internal
error.
1) Re-boot the unit and see if the prob-
lem goes away .
2) If the problem persists, replace the
computer.
DISP_ERROR
32 ERR_CCB_FIFO_WRITE
Error writing to CCB FIFO. This is
reported when the computer has an
internal error
1) Re-boot the unit and see if the prob-
lem goes away .
2) If the problem persists, replace the
computer.
DISP_ERROR
33 ERR_INVALID_PROD_ID
Invalid Product Id. This is reported if
the product id is invalid.
1) Re-boot the unit and see if the prob-
lem goes away .
2) If the problem persists, replace the
computer.
DISP_ERROR
34 ERR_FIT_SET_MODE_TIMEOUT
Timeout waiting for the Fit CPU to
change mode. This is reported when
the Display times out waiting for the
FitCPU to change to the specied
service mode.
1) Re-boot the unit and see if the prob-
lem goes away .
2) If the problem persists, check the
comms cable between the FitCPU and
the Display .
3) If the problem still persists change
the comms cable.
DISP_ERROR
35 ERR_FIT_DURATION_RESP_TIMEOUT
Timeout waiting for duration response
from Fit CPU. This is reported when
the Display times out waiting for the
FitCPU to respond to a new duration
time command.
1) Re-boot the unit and see if the prob-
lem goes away .
2) If the problem persists, check the
comms cable between the FitCPU and
the Display .
3) If the problem still persists change
the comms cable.
DISP_ERROR
36 ERR_FIT_INVALID_DURATION
Fit CPU reports invalid duration set-
ting. This indicates that the duration
parameter was reported as invalid by
the FitCPU.
1) Re-boot the unit and see if the prob-
lem goes away .
2) If the problem persists, check the
comms cable between the FitCPU and
the Display .
3) If the problem still persists change
the comms cable.
DISP_ERROR