Star TSP100 futurePRNT User Manual

– 7 –
3-1-2. PU Model
CAUTION
Make sure that the printer is turned off before connecting the PoweredUSB cable (Y cable) or
PoweredUSB cable (straight type).
(1) According to the cable used, install the connector cover onto the printer to prevent im-
proper cable connections.
USB cable or PoweredUSB cable (Y cable) ............Connector cover A
PoweredUSB cable (straight type) ..........................Connector cover B
The printer is shipped with connector cover B installed. This cover does not need to be
removed when using the PoweredUSB cable (straight type). When using a USB cable or
PoweredUSB cable (Y cable), remove connector cover (B) and install connector cover (A)
to the printer until a click is heard.
To remove connector cover (B), use a at-head screwdriver as shown to push in the hook
on the cover.
Connector cover A
Connector cover B
Hook
Connector cover B
Hook
1 2
3 4

Star TSP100 futurePRNT Specifications

General

Print Method	Direct Thermal
Print Resolution	203 dpi
Paper Width	80 mm
Cutter	Auto Cutter
Maximum Print Width	72 mm
Dimensions	142 x 204 x 132 mm
Operating Temperature	5°C to 45°C
Storage Temperature	-20°C to 60°C
Interface	USB
Media Width	80 mm
Compatibility	Windows, Linux, macOS, Android, iOS
Weight	1.7 kg