– 30 –
Notes: 1. Pin 1 must be shield drain wire connected to peripheral device frame ground.
2. It is not possible to drive two drives simultaneously.
3. The peripheral drive duty must satisfy the following:
ON time / (ON time + OFF time)
0.2
4. Minimum resistance for coils L1 and L2 is 24
Ω
.
5. Absolute maximum ratings for diodes D1 and D2 (Ta = 25°C) are:
Average Rectied Current Io = 1A
6. Absolute maximum rating for transistors TR1 and TR2 (Ta = 25°C) are:
Collector current Ic = 2A
To Next Page
Loading...
