– 19 –
4-2. Attaching the Cable Cover
Attach the cable cover as shown in the illustration.
4-3. Switch Blind Installation
It is not necessary to install the switch blind. Only install it if it is necessary for you. By install-
ing the switch blind, the following become possible.
• Preventing the power switch from being operated by mistake.
• Ensuring that other people can not easily operate the power switch.
Install the switch blind as shown in the diagram below.
The power switch can be turned ON ( I ) and OFF (O) by inserting a narrow instrument (ball
penetc.) in the holes in the switch blind.
To Next Page
Loading...
