Maximum Request Rate 10 Hz
Data Clock Frequency 1,250 Hz
Digimatic (MTI) Protocol
The gage supports the Digimatic (MTI) protocol, also commonly referred to as SPC. Digimatic is a 3 wire (REQ,
DATA, CLK) communication protocol that operates at TTL levels and sends gage measurements in a 13 digit (52
bit) packet format. The output is compatible with most data collection devices supporting the Digimatic protocol
including the Electronic Measuring System.
Packet Timing
Wireless Communication
The CORE & VRS indicators have two wireless communication options available.
Shortrange Smartphone Interface
The gage supports communication using a shortrange wireless radio compatible
with most major smartphones. Using the free Android and iOS apps, a user can
perform the following actions:
• Connect to 7 devices
• View measurements in analog and digital formats
• Record measurements and share via email
• Change settings
The smartphone interface can also be provided for use in custom application.
Users should contact support for more details.
MicroRidge
The gage may include a longer range RM2.4 MicroRidge radio module.
This allows the gage to be integrated into the complete MicroRidge
ecosystem. The radio supports transmission of measurements at up to 5
Hz and can be received using one of the MicroRidge base receivers
(USB, RS232, Wedge)
Contact MicroRidge or visit microridge.com for further details on their
wireless system
To Next Page
Loading...
