Software
UR44C Operation Manual 10
% Solo
Turns the solo function on (lit) and off (unlit).
^ Fader
Adjusts the signal level.
Range: -∞ dB − +6.00 dB
& Fader Value
Displays and adjusts the Fader value. Enable editing of
the value by double clicking the number.
DAW Area
This is the area for configuring the DAW channel settings.
1 Level Meter
Indicates the signal level.
2 Balance
Adjusts the volume balance of the left and right channels.
Range: L16 − C − R16
3 Balance Value
Displays and adjusts the Balance value. Enable editing of
the value by double clicking the number.
4 Mute
Turns the mute function on (lit) and off (unlit).
5 Solo
Turns the solo function on (lit) and off (unlit).
6 Fader
Adjusts the signal level.
Range: -∞ dB − +6.00 dB
7 Fader Value
Displays and adjusts the Fader value. Enable editing of
the value by double clicking the number.
REV-X Area
This is the area for configuring the REV-X channel
settings.
1 Level Meter
Indicates the signal level.
2 REV-X Edit
Opens (lit) and closes (unlit) the “REV-X” (
page 18
) setup
window.
3 REV-X Type
Selects the REV-X type.
Options: Hall, Room, Plate
4 REV-X Time
Adjusts the reverb time of REV-X. This parameter links to
Room Size. The adjustable range varies depending on
REV-X type.
5 REV-X Time Value
Displays and adjusts the REV-X Time value. Enable
editing of the value by double clicking the number.
6 REV-X Send
Indicates that REV-X Send is on (lit) and off (unlit). Either of
MIX 1 or MIX 2 can be set to on.
7 REV-X Return Fader
Adjusts the return level of REV-X.
2
3
7
4
5
6
1
REV-X Type Range
Hall 0.103 sec − 31.0 sec
Room 0.152 sec − 45.3 sec
Plate 0.176 sec − 52.0 sec
To Next Page
Loading...
