Steinberg UR44C - Technical Specifications

Appendix
UR44C Operation Manual 37
Technical Specifications
MIC INPUT 1-4 (balanced)
Frequency Response +0.0/-0.3 dB, 20 Hz − 22 kHz
Dynamic Range 102 dB, A-Weighted
THD+N 0.003%, 1 kHz, -3 dBFS, 22 Hz/22 kHz BPF
Maximum Input Level +6 dBu
Input Impedance 3 kΩ
Gain Range +6 dB − +60 dB
HI-Z INPUT 1/2 (unbalanced)
Maximum Input Level +9.0 dBV
Input Impedance 1 MΩ
Gain Range +0.8 dB − +54.8 dB
LINE INPUT 3/4 (balanced)
Maximum Input Level +24 dBu
Input Impedance 10 kΩ
Gain Range -12 dB − +42 dB
LINE INPUT 5/6 (balanced/unbalanced)
Frequency Response +0.0/-0.2 dB, 20 Hz − 22 kHz
Dynamic Range 106 dB, A-Weighted
THD+N 0.0015%, 1 kHz, -1 dBFS, 22 Hz/22 kHz BPF
Maximum Input Level +22 dBu (+4 dBu input), +2.1 dBV (-10 dBV input)
Input Impedance 10 kΩ (+4 dBu input), 10 kΩ (-10 dBV input)
Gain Selection +4 dBu or -10 dBV input Switchable
MAIN OUTPUT (balanced/unbalanced)
Frequency Response +0.0/-0.2 dB, 20 Hz − 22 kHz
Dynamic Range 106 dB, A-Weighted
THD+N 0.0015%, 1 kHz, -1 dBFS, 22 Hz/22 kHz BPF
Maximum Output Level +16 dBu
Output Impedance 75 Ω
LINE OUTPUT (balanced/unbalanced)
Frequency Response +0.0/-0.2 dB, 20 Hz − 22 kHz
Dynamic Range 106 dB, A-Weighted
THD+N 0.0015%, 1 kHz, -1 dBFS, 22 Hz/22 kHz BPF
Maximum Output Level +16 dBu
Output Impedance 75 Ω
PHONES 1/2
Maximum Output Level 100 mW+100 mW, 40 Ω
USB
Specification USB 3.0, 32-bit, 44.1 kHz/48 kHz/88.2 kHz/96 kHz/176.4 kHz/192 kHz
XLR INPUT
Polarity 1: Ground
2: Hot (+)
3: Cold (-)