Software
UR44C Operation Manual 15
Hardware Setup Window
This window allows you to configure general hardware
settings and Cubase-linked function settings.
1 model
Displays the name of the device.
2 HPF
Selects the cutoff frequency of the high pass filter (not
available on [LINE INPUT 5/6]).
Settings: 120Hz, 100Hz, 80Hz, 60Hz, 40Hz
3 LINE Input Level
Selects the input signal level of [LINE INPUT 5/6].
Options: +4 dBu, -10 dBV
4 Scene
Automatically applies scene information to the UR44C
device when loading a Cubase project file containing
UR44C scene data.
NOTICE
Data saved to the device will be overwritten.
5 Channel Link
Automatically configures stereo links based on the bus
configuration in use.
To Next Page
Loading...
