6 10621 Owner’s Manual
Variable Speed Trigger on remote.
The crane should not function until the trigger has been
activated. The speed of the crane will vary in direct
correlation with how much or how little the trigger is engaged.
NOTE: The radio control is an electri-
cal device. Please handle with care!
1
6 Function Hetronic Remote
4.Operate Crane
A. Turn on necessary power to the crane.
B. Activate toggle switch for desired crane
function.
D. Activate the variable speed trigger to
control the desired function.
E. When operation is complete, store
remote handle in a safe, dry location.
5. Store Outriggers
Retract outriggers using the control levers
or switches marked ‘outrigger’.
6. Turn Off Power to Crane
Deactivate power to crane and outriggers.
7. Disengage the PTO
A. On manual transmission vehicles,
depress the clutch pedal completely.
B. Disengage the PTO switch.
C. If vehicle is a manual transmission,
release the clutch pedal gradually.
To Next Page
Loading...