Safety 3
Crane Controls
1. Be familiar with the sequence and
operation of the crane controls.
2. Each individual crane function should
have control function decals. Replace
them immediately if they are missing or
illegible.
3. Keep hands, feet, and control levers
free from mud, grease, and oil.
4. Be familiar with the remote control and
how it operates before attempting to
lift a load.
5. Be prepared before beginning
operation of the crane:
• All protective guards must be in
place.
• Be aware of the surroundings: low
branches, power lines, unstable
ground.
• Be sure all safety devices provided are
in place and in good operating
condition.
• Be prepared for all situations. Keep
fire extinguisher and first aid kit near.
• Be sure all regular maintenance has
been performed.
• Visually inspect all aspects of the
crane for physical damage.
• Check for fluid leaks.
• Make sure the outriggers are down
and stable.
Be familiar with your remote control and
how it works before operating the crane.
ATTENTION
Stellar Industries, Inc. is not liable
for accidents incurred by the
crane because of the operator’s
non-fulfillment of current rules,
laws and regulations.
To Next Page
Loading...