32 10621 Owner’s Manual
9. Secure the crane using the mounting
hardware provided. Note: longer or shorter
cap screws may be required –
recommended thread engagement into
crane base is 1.75” – use grade 8, zinc
plated cap screws only.
10. Torque the cap screws to 680 ft-lbs.
11. Remove supporting crane.
12.
Hook-up hydraulics and electrical using the schematics provided in Chapter 8 -
Hydraulics - Electrical.
Note: If questions should arise during any portion of this installation, please contact Stellar
Customer Service at (800) 321-3741.
Installation Details Continued...
To Next Page
Loading...