Instruction Manual
for
AS380 Series Elevator Integrated Drive Controller
73
mean elevator moving up mean elevator moving down
mean elevator stop
The floor located is expressed with two digit of decimal system
At the item: door condition
Mean door opening mean door opening in place
mean door closing mean door closing in place
1 elevator speed
This menu display the current running speed of elevator, the unit is M/S. as above fig, the current
speed displayed is 1.75m/s
3 fault code
Fault code
Fault code serial No
The integrated unit can save up to 20 fault code. The latest fault code serial no is 00. use up or
down key to browse the these fault code. Press enter key to display the fault date, press left or
right key to check the time and floor that fault occurred. Press esc to quit.
4 System years
To Next Page
Loading...
Need help?
General
