Full Digital Stepper Drive DM542S
1. Overview
The DM542S is a two phase digital stepper driver based on ARM. Its
Microstep resolution and output current are programmable. And it has
advanced control algorithm which brings a unique level of system smoothness,
provides optimum torque and mid-range instability. The control algorithm of
Multi-Stepping can allow stepper motor a smooth system performance. The
control algorithm of torque compensation can improve the torque of motor at
high speed. The control algorithm of motor self-test and parameter auto-setup
technology offers optimum responses with different motors and easy-to-use.
The control algorithm of smoothness can enhance the acceleration and
deceleration of motor. Its unique features make the DM542S an ideal solution
to applications.
Parameter auto-setup and motor self-test
Multi-Stepping inside, Small noise, low heat, smooth movement
Torque compensation at high speed
Variable current control technology, High current efficiency
Accelerate and decelerate control inside, Great improvement in smoothness
of starting or stopping the motor
Storage the position of motor
Optically isolated input and compatible with 5V ~ 24V
Over current and over voltage protection
To Next Page
Loading...
Need help?
General
