Steris SYSTEM 1 endo User Manual

T6800 Rev B Operator Manual Maintenance
SYSTEM 1 endo Liquid Chemical Sterilant Processing System
9-24
Change Values Selections
• LANGUAGE - This setting allows selection of a pre-programmed language
for displays and printouts. Default is for displays and printouts to be in
the language of the destination country to which the system is shipped.
• ACCESS CODE - When enabled, this option locks out operator access to
all Change Values selections except LANGUAGE. The ACCESS CODE
limits access to locked-out options and control settings, making them
unavailable for change by an operator without first entering the ACCESS
CODE. Default is for NO ACCESS CODE.
• FILTER CHANGED - The "YES" option should be selected each time the
MaxLife water filter is replaced with a new filter. Default is "NO".
• TIME SET - This setting allows adjustment of the control to display and print
the current time of day (see TIME FORMAT for setting the time format).
• DATE SET - This setting allows adjustment of the control to display and
print the current date (see DATE FORMAT for setting the date sequence).
• OPERATOR ID - This option selection assigns a numeric code to an
operator-selected user name that will appear on cycle printouts. Default
is for NO OPERATOR ID number.
• PATIENT ID - This option selection assigns a numeric code to
specific patients that will appear on cycle printouts. Default is for NO
PATIENT ID.
• DEVICE ID - This option selection assigns a numeric code linked to specific
devices, that will appear on cycle printouts. Default is for NO DEVICE ID.
• PROCEDURE ID - This option selection assigns a numeric code linked
to specific procedures, that will appear on cycle printouts. Default is for
NO PROCEDURE ID.
• PHYSICIAN ID - This option selection assigns a numeric code to an
operator-selected physician’s name that will appear on cycle printouts.
Default is for NO PHYSICIAN ID.
• INFORM OPTION - This option selection for Informative Options enables a
series of cycle-related questions to appear on the display, for the operator
to answer, before beginning a cycle. Default is for NO INFORM OPTION.
• AUTO DUPL PRINT - This setting allows the Processor to automatically
furnish a duplicate printout at the end of each cycle. Printout will note --
DUPLICATE PRINT -- and complete printout of cycle data will be furnished.
Default is for NO AUTO DUPL PRINT.
• END OF CYCLE TONE - This selection is for an end-of-cycle tone to
sound at the completion of each cycle. Tone can be set ON (YES) or OFF
(NO). Default is YES for END OF CYCLE TONE.
• TIME FORMAT - This setting establishes the sequence for time displays
and printouts in either AM/PM or 24-hour format. Default is AM/PM. (See
TIME SET for setting current time.)
• DATE FORMAT - This setting establishes the sequence for date displays
and printouts. Default is MDY (Month/Day/Year) sequence. Options
are DMY (Day/Month/Year), YMD (Year/Month/Day) (see DATE SET for
setting the current date).

Steris SYSTEM 1 endo Specifications

General

Brand	Steris
Model	SYSTEM 1 endo
Category	Laboratory Equipment
Language	English