To Next PageTo Next PageWhat to do if Stihl Power Tool has no spark due to ignition lead?
If your Stihl Power Tool has no spark, there may be a break in the ignition lead or damaged insulation. Check the ignition lead and replace the ignition module if necessary.
What causes Stihl Power Tool engine to overheat?
If your Stihl Power Tool engine is overheating, it might be due to insufficient cylinder cooling, such as blocked air inlets in the rewind starter or very dirty cooling fins on the cylinder. Thoroughly clean all cooling air openings and the cylinder fins.
Why Stihl Power Tool engine runs roughly with wrong fuel mixture?
If your Stihl Power Tool engine runs roughly, misfires, or experiences temporary loss of power, it could be due to an incorrect fuel/oil mixture. Ensure you are using the correct mixture of fuel and oil, avoiding too much oil.
Why Stihl Power Tool engine runs erratically with worn piston ring?
If your Stihl Power Tool engine does not deliver full power or runs erratically, the piston ring might be worn or broken. Fit a new piston ring to resolve this issue.
General| Engine Displacement | 27.2 cc |
|---|---|
| Power Output | 0.8 kW |
| Engine Type | 2-stroke |
| Shaft Type | Straight |
| Starter System | Recoil |
| Overall Length | 147 cm |
| Vibration Level | 4.5 m/s² |
