STIHL recommends wearing hearing protection.
Use with a mowing head except PolyCut 18-2
–
Sound pressure level L
pA
measured in accord‐
ance with IEC 62841-4-4: 81 dB(A)
–
Sound power level L
wA
measured in accord‐
ance with IEC 62841-4-4: 94 dB(A)
–
Vibration value a
hv
measured in accordance
with IEC 62841-4-4
–
Control handle: 2.9 m/s²
–
Loop handle: 5.2 m/s²
Use with a mowing head PolyCut 18-2
–
Sound pressure level L
pA
measured in accord‐
ance with IEC 62841-4-4: 82 dB(A)
–
Sound power level L
wA
measured in accord‐
ance with IEC 62841-4-4: 93 dB(A)
–
Vibration value a
hv
measured in accordance
with IEC 62841-4-4
–
Control handle: 2.1 m/s²
–
Loop handle: 2.7 m/s²
Use with a metal cutting attachment
–
Sound pressure level L
pA
measured in accord‐
ance with IEC 62841-4-4: 81 dB(A)
–
Sound power level L
wA
measured in accord‐
ance with IEC 62841-4-4: 94 dB(A)
–
Vibration value a
hv
measured in accordance
with IEC 62841-4-4
–
Control handle: 3.4 m/s²
–
Left handle: 4.1 m/s²
The vibration levels indicated were measured
according to a standardized test method and can
be used as a basis for comparing electric power
tools. The vibration levels actually occurring may
vary from the values indicated, depending on the
type of application. The vibration levels indicated
can be used for an initial estimate of the vibration
stress. The actual vibration stress has to be esti‐
mated. The times can be taken into account in
the estimate when the electric power tool is
switched off and also when it is switched on but
running without any load.
For information on compliance with the Vibration
Directive 2002/44/EC, see www.stihl.com/vib.
20.8 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
21 Combinations of Cutting Attachments and Deflectors
21.1 Combinations of cutting attachments, deflectors and carrying systems
Cutting attachment Deflector Barrier bar Carrying System
–
PolyCut 18-2 mowing head
(335 mm diameter)
Mowing head with 2.4 mm
diameter “round, quiet” mow‐
ing line:
–
AutoCut 25-2 mowing head
–
AutoCut C 26-2 mowing
head
–
AutoCut 27-2 mowing head
–
AutoCut 28-2 mowing head
–
AutoCut 36-2 mowing head
–
DuroCut 20-2 mowing head
–
SuperCut 20-2 mowing
head
–
TrimCut C 32-2 mowing
head
–
Deflector for
mowing heads
(380 mm diam‐
eter)
–
optional
–
Shoulder strap
–
Full harness with quick-
release system
–
Grass cutting blade 230-2
(Ø 230 mm)
–
Grass cutting blade 230-4
(Ø 230 mm)
–
Grass cutting blade 230-8
(230 mm diameter)
–
Deflector for
metal cutting
attachment
(230 mm diam‐
eter)
–
required
English 21 Combinations of Cutting Attachments and Deflectors
24 0458-027-0101-A
To Next Page
Loading...
Need help?
General
