Stihl RE 100 PLUS CONTROL - Activating and Locking the Spray Gun Trigger; Unrolling the High-Pressure Hose; During Operation

0458-004-8621-A
24
English 12 During Operation
12.1 Unrolling the High-Pressure Hose
► Completely unroll the high-pressure hose (1).
NOTICE
Remove the high-pressure hose from the hose reel before
spraying. If the high-pressure hose is not completely
unrolled from the hose reel, it may be damaged by high-
pressure.
12.2 Activating and Locking the Spray Gun Trigger
The pressure washer is designed for two-handed operation.
Activating the spray gun trigger
To pull the spray gun trigger:
► Slide the retaining latch (1) to the position.
► Press and hold the spray gun trigger (2).
The high-pressure pump starts up automatically and water
flows out of the nozzle.
Locking the spray gun trigger
To lock the spray gun trigger:
► Release the spray gun trigger (2).
The high-pressure pump switches off automatically when
you release the spray gun trigger. Water stops flowing out
of the nozzle but the pressure washer remains switched
on.
► Slide the retaining latch (1) to the position to lock the
spray gun trigger.
12 During Operation
1
0000-GXX-9835-A1
2
1
0000097568_002
2
1
0000097575_002