0458-004-8621-A
31
English
17 Inspection and Maintenance
17.1 Inspection and Maintenance Chart
17 Inspection and Maintenance
The following maintenance intervals are examples and apply for normal operating
conditions. Actual use and your experience will determine the frequency of required
inspection and maintenance.
Before starting
work
After finishing work
or daily
Weekly
Relevant Chapter
Complete Machine Visual inspection X
Clean X @ 16
Connectors on high-pressure hose Clean X
Coupling on the spray lance and spray gun Clean X @ 16.3
Water intake screen at inlet of high-pressure pump Clean X @ 16.4
Spray nozzle Clean X @ 16.3
To Next Page
Loading...
