What to do if my Stihl Pressure Washer switches off while in operation?
If your Stihl Pressure Washer switches off during operation, check if the power supply cord is properly connected to an electrical outlet. Also, the electric motor might be too warm. In this case, allow the pressure washer to cool at ambient temperatures for approximately 5 minutes. You may also need to clean the nozzle.
Introduces the manual, safety signals, and guidance for using the document.
Details the main parts of the pressure washer and spray attachment.
Explains safety symbols found on the pressure washer for user awareness.
Crucial safety warnings and instructions for operating the pressure washer safely.
Guidelines for operator qualifications, health, and necessary personal protective equipment.
Safety considerations for power cord usage and water supply connections.
Instructions for preparing the unit and assembling its parts before operation.
Procedures for connecting the pressure washer to water sources and hoses.
Steps for switching the pressure washer on, off, and operating it.
Details on unrolling the hose, using the trigger, and adding detergents.
Procedures for cleaning the unit and protecting it from freezing temperatures.
Schedule and tasks for routine inspection, maintenance, and gasket lubrication.
Solutions for common problems encountered with the pressure washer.
Key technical data, symbols, replacement parts, and disposal information.
General| Form factor | Upright |
|---|---|
| Hose length | 9 m |
| Cable length | 5 m |
| Power source | Electric |
| Product color | Black, Orange |
| Pump material | Aluminum |
| Detergent tank | - |
| Maximum flow rate | 500 l/h |
| Minimum flow rate | 400 l/h |
| Sound power level | 86 dB |
| Vibration emission | 2.4 m/s² |
| Working pressure (max) | 150 bar |
| Working pressure (min) | 135 bar |
| Maximum water temperature | 40 °C |
| AC input voltage | 230 V |
| Power consumption (typical) | - W |
Weight and Dimensions| Weight | 21200 g |
|---|
To Next Page
