0478-131-3052-A
53
English
14 Menu Functions
Edge mowing
14.4 Information
Messages
Events
Robotic mower status
Lawn information
Press the OK button to mow the edge of the mowing
area.
After completing one circuit, the robotic mower
travels back to the docking station and charges the
battery.
This submenu contains a list of all active errors and
recommendations including date and time of their
occurrence and the respective message code.
Press the OK button to display details for every
message, @ 22.1.
If no messages are available, this display shows the
text "No messages."
This submenu contains a list of the last activities of
the robotic mower. Details of the events (additional
text, time and code) can be displayed by pressing the
OK button.
Errors during normal operation are documented in
the messages.
This submenu contains information on the robotic
mower's status:
– Charging status: Battery charging status in percent
– Rem. time: The remaining mowing duration during
the current week in hours and minutes
– Time and date
– Start time: Start of the next planned mowing
operation
– Total number of completed mowing operations
– Mowing hours: Duration of all completed mowing
operations in hours
– Distance: Total distance covered in meters
– Ser.-No.: Serial number of the robotic mower. This
is also to be found on the identification plate in the
compartment beneath the control panel / manual
controller.
– Battery: Serial number of the battery
– Software: Installed machine software
This submenu contains information on the lawn:
– Mowing area in square meters: This measurement
is taken during installation
– Round time: Duration of one circuit around the
mowing area in minutes and seconds
– Starting points 1 – 4: Distance of the relevant
starting point from the docking station in meters,
measured in a clockwise direction
– Circumference: Circumference of the mowing area
in meters
– Edge mowing: Frequency of edge mowing per
week
To Next Page
Loading...
Need help?
General
