0478-131-3052-A
79
English
22 Troubleshooting Guide
4002 – Rollover See message 1000. ► See message 1000.
4003 – Hood lifted
Check hood, Then press
OK
Hood has been lifted. ► Check the hood and confirm the message by
pressing the OK button.
4004 – Internal fault
Press OK to release
– Error in the program sequence.
– Power failure during automatic operation.
– Robotic mower is located outside the mowing
area.
► Check power supply to the docking station.
The LED must glow red during operation.
► Return the robotic mower to the mowing area.
► Confirm message by pressing the OK button.
4005 – Internal fault See message 4004. ► See message 4004.
4006 – Internal fault See message 4004. ► See message 4004.
4008 – Internal fault See message 4004. ► See message 4004.
4027 – STOP button
pressed
Press OK to release
STOP button has been pressed. ► Confirm message by pressing the OK button.
Message Possible Cause Remedy
To Next Page
Loading...
